准噶尔盆地三台-北三台地区第三系勘探潜力分析

从沉积及储层组合、油气运移系统等方面全面剖析了准噶尔盆地三台-北三台地区第三系油气成藏条件，建立了成藏模式，对未钻探区勘探潜力进行了预测；通过分析，认为该区第三系储层物性主体差，断裂更多地表现为封闭性，导致沟通深部油气源的运移体系不畅，致使第三系圈闭不能有效捕获和储集油气。圈闭又比较匮乏，主体勘探潜力不大。北25井西背斜紧邻多期活动的甘诃子北断裂，第三系可能发育较好的储层，相对有利，北25井西背斜应是钻探第三系的首选目标。     

气体悬浮焙烧炉内衬烘炉曲线的确定

根据所使用的低水泥浇注料的性能，对中铝山西分公司检修厂4号焙烧炉制定了合理的烘烤曲线，提高了耐火内衬的质量，延长了内衬的使用寿命。     

提高中高含水期油井压裂经济效益的方法

为提高葡北油田中高含水期油井压裂经济效益，合理选择压裂井层尤为重要。应用水驱特征曲线预测出油井压裂前可采储量，从而计算出剩余可采储量及可采储量采出程度，通过绘制油井压裂前剩余可采储量及可采储量采出程度与油井压裂后所创经济效益之间关系曲线，寻找出相关规律，进行优选压裂井，再根据精细地质研究成果，在剩余油富集区选择具体压裂层位。经实际应用，取得了较好效果，提高了油井压裂方案符合率，提高了经济效益，进而总结出一套适合葡北油田中高含水期油井压裂选井选层方法，对今后进一步搞好油井压裂增产工作具有指导意义。     

1270轧机弹性曲线的回归及参数估计

首先介绍了轧机弹性曲线的基础知识及 1 2 70轧机AGC系统的基本结构 ,然后论述了数据采集的方法 ,最后根据最小二乘法得到轧机弹性曲线的回归模型及刚度系数的实验结果。     

On the Locus of Speed-Accuracy Trade-Off in Reaction Time: Inferences From the Lateralized Readiness Potential.

Lateralized readiness potentials (LRPs) were used to determine the stage(s) of reaction time (RT) responsible for speed-accuracy trade-offs (SATs). Speeded decisions based on several types of information were examined in 3 experiments, involving, respectively, a line discrimination task, lexical decisions, and an Erikson flanker task. Three levels of SAT were obtained in each experiment by adjusting response deadlines with an adaptive tracking algorithm. Speed stress affected the duration of RT stages both before and after the start of the LRP in all experiments. The latter effect cannot be explained by guessing strategies, by variations in response force, or as an indirect consequence of the pre-LRP effect. Contrary to most models, it suggests that SAT can occur at a late postdecisional stage. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of functionalization and boron and nitrogen substitution on some properties of carbon nanotubes

Molecular orbital calculations of the ionization potential of single wall carbon nanotubes having donor NH₂ and acceptor NO₂ groups bonded to the side walls and ends and boron and nitrogen substituted for carbon show substantial increases in ionization potential compared to carbon nanotubes with no functional groups and no carbon substitutions. The presence of a carbon vacancy on the side wall also causes a substantial increase in the ionization potential. The effect of tube length on the ionization energy is also calculated. The calculations also suggest that at appropriate levels of boron and nitrogen doping the armchair carbon nanotubes could be high temperature organic ferromagnetic materials.     

Step response classification for model-based autotuning via polygonal curve approximation

A model-based autotuning method consists of an identification and a regulator tuning phase. To achieve satisfactory performance and robustness, it is advisable that both phases be tailored a priori to the characteristics of the observed process dynamics. Such characteristics include, but are not limited to, the model structure. For example, overdamped and underdamped models with the same pole-zero structure are parametrised and controlled in different ways. Step response data, that are typically used for the identification phase in the autotuning context, can also be pre-processed to reveal those characteristics. This paper presents a step response classification method suitable for the above purpose. The method is based on a polygonal curve approximation technique for data pre-processing, followed by a neural network classifier. Only normalised I/O data are employed, so that the neural network can be trained off-line with simulated data. Simulation results are reported to show the effectiveness of the proposed classification method in terms of the achievable tuning results.     

误读与纠正

分析材料试验机度盘偏转角度小 (准确度低 )、试样打滑、定义 (上屈服强度 -下屈服强度 -屈服强度 )模糊、不同应力速率等导致误读 ,并针对误读原因提出纠正方法。     

Streaming potential measurements on stainless steels surfaces: evidence of a gel-like layer at the steel/electrolyte interface

Electric charges at the surface of a passive stainless steel are generally considered as concentrated either in the passive film itself, or at the metal/passive film interface, or in the electrical double layer at the film solution interface. Rest potential time dependence after immersion of a passive surface in aqueous electrolytes suggests however that slow processes occur in the onset of the surface charge. Specific experiments, such as streaming potential measurements and electrochemical impedance spectroscopy in a thin electrolyte cell, were carried out for understanding better this phenomenon. An AISI 304 type austenitic stainless steel with polished or bright annealed surface finishes was immersed in NaCl aqueous solutions with various pH and chloride concentrations. The streaming potential time evolution shows two steps: a first rapid one (∼2 min) is attributed to the onset of the surface charge. The second step is much slower (approximately several hours) and possibly due to an interphase layer between the passive film and the solution. Following this idea, the whole kinetics is controlled by cation migration across the interphase when the pH is larger than the isoelectric pH (pH_iep), while chloride ions are incorporated in the interphase when pH < pH_iep. Impedance measurements allow determining both the kinetics of charge transport and the thin cell conductivity. When glass is used as reference material for the cell walls instead of stainless steel, the Nyquist plots show a high-frequency response. For stainless steel cell walls, a low-frequency response is observed, attributed to a slow charge reorganisation inside the interphase layer. The charge distribution at metal/electrolyte interface is discussed in terms of a gel-like layer which possibly takes place at the passive film/electrolyte interface.     

砼受压损伤力学本构模型的研究

本文利用ＭＴＳ公司８１５．０２型电液伺服试验系统对砼进行了等应变速率加载控制的应力一应变全曲线试验，应用不可逆热力学和内变量理论的成果建立了砼损伤力学模型，并用概率统计的观点分析了损伤的演化规律。由于考虑了不可逆变形的影响，本文所建本构模型与实验吻合较好。